router-lifetime
Configures the default router‘s
lifetime, in seconds, advertised in RAs
Supported on the following devices:
- Access Points:
AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632,
AP7662, AP8163, AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
Syntax
router-lifetime <0-9000>
Parameters
router-lifetime <0-9000>
| router-lifetime <0-9000> |
Configures the default router‘s lifetime
- <0-9000> – Specify a value from 0 - 9000 seconds. The default value is 1500
seconds.
Note: A value of “0” indicates that this router is not the default
router.
|
Examples
nx9500-6C8809(config-ipv6-radv-policy-test)#router-lifetime 2000
nx9500-6C8809(config-ipv6-radv-policy-test)#show context
ipv6-router-advertisement-policy test
ra suppress
ra interval 200
managed-config-flag
nd-reachable-time global
router-lifetime 2000
advertise mtu
advertise hop-limit
check-ra-consistency
dns-server 2002::2 lifetime 3000
domain-name TechPubs lifetime infinite
nx9500-6C8809(config-ipv6-radv-policy-test)#
